Dental Polishing Preparation Kit

Application of Dental Polishing Preparation Kit:it’s kinds of dental Anterior Posterior Preparation Kit for Ceramics Zirconia Crown.

Feature of Dental Polishing Preparation Kit:

Reasonable Collocation,Complete shape,Suitable for all kinds of cavity preparation

New electroplating process,Increase cutting force and prolong applicable life

New material for Base support，Safe and non-toxic, resistant to high temperature and high pressure，can be directly placed in the disinfection box for disinfection

Clear product number,make it easier for users to supplement timely due to consume a single product too quickly

The product is made by special technology, which is more targeted for grinding and polishing different materials of restorations.

Specification of Dental Polishing Preparation Kit:

Order No.FG1112D

Packing: 12 pc/box

Type:SO-20，BT-15，EX-52，EX-54，EX-55，TR-33，TR-D10，FO-23，SF-D41F，TR-08F，TR-D36F，SH3414

1. SO-20: The maximum rotational speed of this model is 30,0000rpm / min,Open the adjacent plane near the far center,Preparation quantity 1. 0MM, don’t hurt the adjacent teeth (The adjacent teeth can be protected by adjacent surface molded tablets before use)

2. BR-15 :Preparation of position 0.8MM for lip and tongue edge and shoulder platform,Depth is shallow concave type

3. EX-52 : For anterior incisor positioning depth 1.5-2.0 mm, it’s easy to control depth

4.EX-54 :Depth（1.2-1.5mm) of transverse incision for anterior lip, it’s easy to control depth

5.EX-55 : It is used to locate the depth of 1.2-1.5 MMM in the transverse and vertical incisors of the lip and tongue of the posterior teeth. The depth is easy to be controlled.

6.TR-33 :Main burs, Removal of deep residual tooth tissue by grinding，Preparation of axial face, shoulder table, crown side edge and tongue side neck sleeve

7.TR-DI0 : Grinding the depth of the occlusal surface and preparing the original shape of the occlusal surface

8. FO-23 : Dressing the tongue surface fossa and preparing the original shape of the living surface fossa

9.SF-D41F: For the refinement of shoulder and shaft surfaces

10.TR-08F: For shoulder trimming to remove edge and non-edge

11.TR-D36F : For the refinement of axial surfaces, occlusal surfaces, crown edges, and shoulder abutments of the tooth，The angle of bur is too big, pay attention to the direction.

12. SH 3414:use the contra angle to polish conglomeration angles of the parabolic and axial surfaces(Pay attention to the use of water spray polishing under the living pulp to prevent heat generation from stimulating the dental nerve)