Water Distilled Machine

 water distilled machine is specially designed for clinic, hospital department, laboratory and other places where a small amount of distilled water is often needed. The distilled water machine adopts fully automatic working mode, which is convenient to use, safe and reliable.

Set up water distilled machine:

1. Remove storage bottle from inside of water distiller

2. Fill tank inside of the machine’s body up to the highest water level line carefully, not to overfill tank( time needed to distill water can be reduced by using already boiled water)

3. Place top cover onto machine’s body making sure the silicone seal is correctly in place around the entire rim. Check to make sure the unit is on a stable surface, then connect power cord from the top cover into the machine’s body.

4. Connect power cord to power outlet

5. Press” starting button”, the fan will come on automatically and the tank will begin to heat, thus starting the distilling process.

6. Water will begin to drip into the storage bottle after approximately 30 minutes, it will take approximately 4 hours to distill 4 liters of water. The unit will automatically shut down when the cycle has finished.

7. Don’t use the first bottle of distilled water, it will take one distilling cycle for the unit to self-clean. Wipe out tank and rinse/discard water in storage bottle, distilled is now ready to create distilled water 

Clean water distilled machine:

Rinse and wipe out tank everyday using clean water.

Calcification and scale will build on bottom of the tank and should be removed every two weeks, use following instruction:

1. Pour enough hot water to cover scale in the tank.

2. Pour 1-4 teaspoons into tank depending on the amount of scale.

3. Leave lid off unit and start up a crcle by pushing “ start button”

4. Let cycle run for 30 minutes, pour out water and wash the inside of tank with clean water

5. If scale is not completely removed repeat the process

6. Replace filter in lid every 2-3 months.

Note: Use the water distilled machine in a dry, well ventilated area

Keep the body of the unit dry-only fill with water using a jug

Start button will begin distilling cycle and unit will automatically turn itself off when cycle is finished. To stop unit mid-cycle remove power cord from socket.

Leave power cord unconnect when unit is not in use

Don’t immerse any part of the unit in water

Don’t remove cover whilst unit is mid-cycle, wait until unit has cooled down before removing top.